EQUIPMENT
|
LIQUID/LIQUID EXTRACTION UNIT
|
|
|
Liquid/liquid extraction is a valuable process in chemical engineering where the separation of one or more of the components from a liquid mixture is required. The Armfield UOP5 unit demonstrates this process in the laboratory so that students may gain a thorough understanding of this industrial technique. Meaningful experiments may be conducted within a two hour laboratory period and students benefit from visual observation of the process |
|
|
SERVICES REQUIRED |
|
|
Electrical supply: |
|
|
UOP5-A: 220-240V/1ph/50Hz |
|
|
UOP5-B: 120V/1ph/60Hz |
|
|
UOP5-G: 220V/1ph/60Hz |
|
|
Cold water supply: mains pressure |
|
|
Vapour extraction system |
|
|
OVERALL DIMENSIONS |
|
|
Height: 2.5m |
|
|
Length: 1.30m |
|
|
Depth: 0.75m |
|
|
SPECIFICATION |
|
|
Volume: 3.3m3 |
|
|
Gross weight: 380kg
|
|
GAS LIQUID ABSORPTION COLUMN |
|
|
The Armfield Gas Absorption Column has been designed to demonstrate the principles of gas absorption and to provide practical training in the operation of gas absorption plant. The packed absorption column is made up of two 75mm diameter borosilicate glass sections joined end to end and installed vertically on a mild steel floor standing framework. The column is filled with 10mm x 10mm Raschig rings, also glass, which are representative of the type of packing used in gas absorption. Liquid for the process is stored in a 50.0 litre rectangular feed tank and a centrifugal pump is used to deliver the liquid to the top of the column where it falls through the packing and returns to the tank. A variable area flow meter in the recirculation line gives a direct reading of flow rate. |
|
|
TECHNICAL DETAILS |
|
|
Feed tank capacity: 50.0 litres |
|
|
Diameter of column: 0.075m |
|
|
Volume of packing: 7.0 litres |
|
|
Height of absorptioncolumn: 1.4m |
|
|
Type of packing: Raschig rings 10x10mm |
|
|
Air compressor capacity: 0.15m3/min@0.3bar |
|
|
Column feed pump capacity |
|
|
Air flow meter range: 20-180 l/min Gas flow meter range: 1.0-22.0 l/min |
|
|
Water flow meter range: 1.0-10.0 l/min |
|
|
|
|
|
SERVICES REQUIRED |
|
|
Electrical supply: UOP7-A: 220-240V/1ph/50Hz UOP7-B: 120V/1ph/60Hz UOP7-G: 220-240V/1ph/60Hz |
|
|
Initial water fill |
|
|
ESSENTIAL ANCILLARY EQUIPMENT |
|
|
CO2 Cylinder with pressure regulator |
|
|
RECOMMENDED ANCILLARY EQUIPMENT |
|
|
Vent piping to outside laboratory |
|
|
Titration glassware for liquid analysis |
|
|
Separate drain tank for treatment of effluent |
|
|
OVERALL DIMENSIONS |
|
|
Height: 2.53m |
|
|
Width: 0.90m |
|
|
Depth: 0.65m |
|
|
SPECIFICATIONS |
|
|
Volume: 2.0m3 |
|
|
Gross weight: 220kg |
|
MASS TRANSFER AND DIFFUSION COEFFICIENTS CERa/CERb |
|
|
Two separate items of laboratory equipment have been designed to allow measurement of molecular diffusivities and, in so doing, to familiarise students with the basic notions of mass transfer theory. The gaseous diffusivity apparatus (CERa) involves diffusion with bulk flow, whilst the liquid diffusivity apparatus (CERb) relates to an equi-molar counter-diffusion process |
|
|
The diffusion of a vapour ‘A’ from a volatile liquid into another gas ‘B’ can be conveniently studied by confining a small sample of the liquid in a narrow vertical tube, and observing its rate of evaporation into a stream of gas ‘B’ passed across the top of the tube. |
|
CERB LIQUID DIFFUSION COEFFICIENTS APPARATUS |
|
|
Armfield has developed a unique diffusion cell which overcomes the traditional problem of slow diffusion rates in liquids requiring long observation times, but without sacrificing accuracy or introducing convective effects. Essentially, the cell consists of a honeycomb of accurately dimensioned capillaries, positioned between two liquids of differing concentration of the solute whose diffusion coefficient is to be determined. |
|
|
SERVICES REQUIRED |
|
|
Electricity supply: CERa-A: 220-240V/1ph/50Hz CERa-B: 120V/1ph/60Hz CERb: Battery operated
|
|
|
OVERALL DIMENSIONS
|
|
|
CERa Gaseous Diffusion Coefficient Apparatus Height: 355mm Width: 450mm Depth: 390mm |
|
|
CERb Diffusion Apparatus Height: 310mm Diameter: 190mm |
|
|
Conductivity Meter Height: 130mm Width: 150mm Depth: 250mm |
|
|
SPECIFICATION |
|
|
CERa: Volume: 0.20m3 Gross Weight: 30kg CERb: Volume: 0.10m3 Gross Weight: 10kg |
